Cart: 0 item(s) - £0.00
​​​​​​​Haven't seen what you want?
 
​​​​​​​

​​​​​​​ 

E-flite 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2)

Product Brand : E-flite
Product Condition:   New
Amps:  40A
Type:  Brushless
£62.99
£69.99
You will earn 62 points which is the equivalent of £0.62
Send to a friend

Key Features

  • Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds) 
  • 5A continuous current, 5V Switch-Mode BEC Circuit (Proper cooling and airflow required) 
  • Stronger BEC for support of most 3-axis stabilization systems 
  • Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage 
  • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage 
  • Programmable motor braking 
  • Safe power-arm mode prevents accidental starts 
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage 
  • Programmable throttle input range (1.1ms-1.9ms or 1.2ms-1.8ms) 
  • Programmable soft start for helis and airplanes 
  • Auto motor shut down if signal is lost or there is interference 
  • Programmable timing-5 user-selectable ranges, use with a large variety of brushless motors 

Overview

The E-flite® 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. 


​​​​​​​