Cart: 0 item(s) - £0.00
​​​​​​​Haven't seen what you want?
 
​​​​​​​

​​​​​​​ 

DYNAM HAWKSKY FPV-READY 25MW SRTF 1370MM 6-AXIS GYRO W/ABS

Product Brand : Dynam
Product Condition:   New
Model Format:  RTF
Power:  Electric
£284.99
You will earn 284 points which is the equivalent of £2.84
Send to a friend

DYNAM HAWKSKY FPV-READY 25MW SRTF 1370MM 6-AXIS GYRO W/ABS

The Dynam Hawksky FPV is specially designed for the FPV enthusiast based on the popular Dynam Hawksky V2. Sticking with Hawksky aircraft type, the Hawksky FPV is extremely stable and capable of maintaining flight at super slow speeds. 

When worked with ISTONE-All stabilizer or MSR66A sport receiver, the airplane can recover to the level flight automatically in any emergency, which allow novice to master flight mechanics with ease. 

Pilot can launch it by hand so that they do not need to taxis for a long time before taking off. It flies gentle and can glide well, which can reduce the power consumption and make the pilot enjoy the FPV in a relaxed mood. 

The pusher configuration and the camera mounted on the nose can give the pilot great vision while the 5.8G 25mW video transmission allows you to enjoy the scenery beyond normal visual range. 

The Hawksy comes complete with a Detrum Gavin 6A 6-channel transmitter with 2.4GHz Direct Sequence Spread Spectrum (DSSS) technology.

Spec Check:

  • Wingspan: 1370mm(53.9in)
  • Length: 950mm(37.4in)
  • Flying weight: 847g
  • Servo: 9g×4
  • Battery: 11.1V 2200mAh 20C Lipo battery w/XT-60 connector
  • ESC: 30A ESC with 3A BEC
  • Motor: BM2810A-KV1900

Video Transmission Specification:

  • Working Frequency: 5.8GHz ISM
  • Output Power: 25mW
  • Channel: 48CH
  • Input Voltage: DC 7V~17V
  • Supply Current: 260mA/12V
  • Antenna Connector: 50Ω SMA
  • Antenna Gain: 2dBi
  • Video Input Impedance: 75Ω
  • Video Band Width: 8MHz
  • Video Format: NTSC/PAL
  • Working Temperature: -40~85?
  • Dimension(L×W×H): 32×21×9mm

Camera Specification:

  • Lens:3MP, 2.1mm
  • Horizontal Resolution: 800TVL
  • Video Standard: PAL/NTSC
  • Power Input: 3.5V~6V

Please Note: This model requires and aftermarket 5.8GHz reciever and display screen are for FPV flying/playback.