Home
About Us
Contact Us
Login
Customer Login
Email
Password
Forgotten your password?
Cart:
0
item(s) -
£0.00
Accessories
Adhesive Tapes
Battery Accessories
Catches
Connectors
Hardware
Props & Spinners
Servo
UBEC
Aircraft
3D Aerobatic
Flying Wing / Delta Wing
FPV
Gliders & Motor Gliders
Indoor & Micro
Jet
Military
Scale
Seaplane
Sport
Trainer
Batteries
Boats
Cars & Trucks
Engines & Accessories
Engines
Motors & ESC
Motors
Aero ESC
Car ESC
Heli ESC
Marine ESC
Quadcopter ESC
Heli & Multirotor
Radio Gear
Accessories
Leads
Receivers
Servos
Transmitters
Haven't seen what you want?
Home
>
Aircraft
>
Scale
« Back
Black Horse PA-18 Super Cub 120cc ARTF
Product Brand :
Black Horse
Product Condition:
New
Model Format
:
ARTF
Power
:
IC
£
999.99
£
999.99
You will earn
999
points which is the equivalent of
£9.99
Send to a friend
Print
Description
***STOCK DUE 2nd DECEMBER***
The PA-18 Super Cub was a big step up from the good old J3 Cub. Not only did it gain a much more powerful, 150Bhp engine there was also the addition of electrical flaps. All at the front of the market back in 1949. many survive today doing sterling work as glider tugs.
The Black Horse Super Cub is a big model at 3.56m span (nearly 12 feet!) yet she manages to sneak under the 20Kg weight limit and avoid the UK large model rules. This was achived by careful design and attention to detail during construction.
Good detail is provided, but has been simplified a little to keep under the weight limit. The size and wing loading means very docile flight characteristics and those flaps bring her down to ridiculously low speeds for operation out of amazingly small fields. No need for a full size airfield! This is by no means an aerobatic model and the flight envelope mirrors the full size.
Construction is the conventional balsa/ply/hardwood used in all Black Horse models and then covered in a classic scheme using Oracover. The cowl is of course GRP and then painted.
Although a big model, she dismantles into reasonable sections for transport.
You will need a good 120cc engine and need to be conscious of the weight when selecting it.
Specifications
Propeller
27 x 10" (Recommended)
Wingspan
3580mm (140.94")
Length
2.237mm (88.07")
Weight
19 - 19.5Kg (41.8 to 42.9lbs)
Servos
10 x Standard size with 15kg torque (Required)
Radio System
6+ Channel (Required)
IC Engine
120cc petrol (Required)
Wing Area
180.1dm2
Wing Loading
105.5g/dm2
Wing Section
USA 35-B
Category
Accessories
Aircraft
3D Aerobatic
Flying Wing / Delta Wing
FPV
Gliders & Motor Gliders
Indoor & Micro
Jet
Military
Scale
Seaplane
Sport
Trainer
Batteries
Boats
Cars & Trucks
Engines & Accessories
Motors & ESC
Heli & Multirotor
Radio Gear